Delta Eldren Two Handle Widespread Bathroom Faucet in Matte Black

Choosing this faucet

The Delta Eldren 35847LF-BL is a Matte Black widespread bathroom faucet with two separate handles. Its stated installation is three holes with spacing from six to sixteen inches, giving the central spout and each handle distinct mounting locations. When choosing it for a vanity, begin with that layout rather than the finish alone.

A compact centerset sink and a widespread sink can look similar in a product photograph, but their faucet openings are not interchangeable. Consider where the handles will sit relative to the basin, backsplash and objects normally kept on the counter. The Eldren's black finish creates a visible accent against many vanity tops; compare the matte surface with nearby lighting, cabinet pulls and towel hardware before deciding on a coordinated set.

Different brands can use similar finish names without producing identical shades. Delta specifies a 1.2 GPM flow rating at 60 psi for this model. Use that figure as a comparison specification alongside the mounting pattern and controls. The exact 35847LF-BL identifier is useful when checking drawings, asking about parts or distinguishing this version from another Eldren finish.

Planning the sink layout

For a replacement, measure between the centers of the outside faucet holes and note the existing central spout position. Record the countertop thickness and the space from the faucet openings to the wall or backsplash. The published six-to-sixteen-inch range describes the widespread mounting pattern; the complete drawing is still needed to assess the surrounding space.

Check the bowl's shape and the proposed water-stream position with your installer, especially when replacing a faucet with a different profile. Separate handles also need space to operate comfortably without meeting raised countertop edges or accessories. Under the vanity, inspect access to the water valves, mounting points and drain. Shelves or drawers can make a connection difficult to reach even when the top has ample room.

Photograph the area before work begins and identify which stored items need to be removed during installation. For a new vanity top, review the faucet drawing before selecting the hole locations. Planning the visible layout and the connections together can prevent a finish choice from becoming an avoidable fit problem.

If the bathroom has two vanities, record the hole pattern and mounting space for each instead of assuming the tops are identical. Keep the basin and countertop documents with the faucet drawing so all three can be reviewed together. This is particularly helpful when a new top will be fabricated or when a replacement faucet has a different spout profile from the fixture currently installed.

Installation and everyday care

Use the maintenance and installation instructions for Eldren 35847LF-BL to plan the work and identify the components. Delta lists 1/2-inch IPS connections and a quick-connect hose for this model. Have the installer compare those details with the existing water supplies rather than assuming the old fittings can be reused.

The model listing includes a push pop-up drain that can be removed from above the deck for cleaning; confirm the actual package contents and basin compatibility before relying on that inclusion. During installation, follow the manufacturer's connection sequence and inspection instructions. Once the fixture is connected, check for leaks at the supplies and drain, and verify that both handles have adequate operating clearance.

Keep the installation sheet available for later cleaning or maintenance questions. For the Matte Black surface, follow the manufacturer's finish-care directions and avoid selecting products solely by the sink material. A cleaner appropriate for one surface may require different handling on another. If the water stream changes or a handle begins to drip, consult the exact-model troubleshooting information and parts diagram.

Do not choose a cartridge or connector simply because another Delta faucet has a similar shape.

How do I plan access and future maintenance?

Keep a small set of records for the finished installation: the full model number, the manufacturer instructions, photographs of the connections and any part labels supplied with the faucet. They help identify the correct item when a drain component, aerator or handle part needs attention. Keep access to the water shutoff valves and mounting area clear when arranging the vanity cabinet.

It is helpful to be able to inspect the connections without emptying several fixed shelves or dismantling a drawer. For routine maintenance questions, describe whether the issue occurs at a handle, at the outlet, beneath the countertop or at the drain. That location helps distinguish problems that can otherwise sound alike. Use the parts information for 35847LF-BL rather than a diagram for a different finish or Eldren variant.

If you later change the basin, repeat the mounting and stream-position checks. The faucet's present fit does not establish compatibility with a different vanity top. Include the sink and countertop identifiers in the maintenance records as well, so a later installer can assess the complete vanity assembly.

What should I check before ordering?

Compare the sink's three-hole pattern, the available clearance and the supplied components before ordering. The Eldren is designed for a widespread layout in the stated six-to-sixteen-inch range, so it should be matched with that configuration on the vanity top. Ask about the selected unit's condition and inspect the faucet, drain and loose hardware needed for your installation.

A manufacturer inclusion describes the model specification; the actual package should be checked when choosing a liquidation item. The drain also needs to suit the basin below the faucet. If the bathroom project includes a new sink, countertop and fixture, keep their drawings together so an installer can review the complete assembly. When coordinating finishes, use Matte Black as the reference and compare surface sheen as well as color.

If a particular accessory or connection is essential to the job, establish that detail before removing the current faucet or scheduling the final installation.