LARSON Platinum Secure Screen 36-in x 81-in White Linen Aluminum Right-hand outswing Surface Mount Security Screen Door

Measure the mounting opening

Record the opening width at several heights and the height at both sides, using the reference surfaces in the applicable LARSON guide. Check the mounting surfaces, threshold and nearby trim. Keep common size, actual unit size and required mounting opening as separate entries on the sketch. A single widest measurement can hide a narrower point or an out-of-plumb side that affects fit.

Draw the exterior hinge and swing

For 45018362L, the supplier identifies the exterior hinge on the left side and right-hand outswing. Mark that position on an entry drawing and include the outward swing arc. Check nearby steps, railings, lights and the main entry door handle. The letter at the end of the model number should not replace this documented handing description.

Choose the entry experience

The stainless-steel screen allows an open screened view rather than a glass panel. Compare the view and screen appearance in person, and consider how the main entry door will be used with the screen door closed. The security designation and three-point lock identify features; no burglar-proof, insect-size filtration or visibility/privacy guarantee is made for this listing.

Worked opening check

A hypothetical measured opening 36 inches wide by 80.5 inches high falls within the linked guide’s 35.875-to 36.375-inch width and 80-to 81-inch height ranges. That is only a dimension screening example. An opening 36.5 inches wide exceeds the listed upper width by 0.125 inch; an installer must assess the approved solution rather than assuming the common 36-inch door label guarantees fit.

Mounting surface width, alignment and other guide requirements still need review.

Plan the QuickFit handle separately

The exact supplier listing and linked manual identify the QuickFit handle set as separate. Confirm the compatible handle for the installed multipoint system and inspect the AHL package for supplied parts. Compare the handle projection with the primary entry handle before purchase. A predrilled opening is a compatibility starting point, not approval for every generic or smart lockset.

Compare White Linen with the entry

Hold an actual finish reference near the entry trim and primary door under daylight. White Linen is the manufacturer’s finish name, not a guarantee that it matches every white paint. Review visible frame width and the view through the screen together when deciding whether this is the intended entry appearance.

Read the exact Platinum guide first

The linked manual requires review of the mounting surfaces and the complete installation sequence before operation. It specifies a 3/4-inch mounting surface at each side and calls for two people when lifting and installing. Have the installer verify the guide against the actual unit and entry conditions before beginning.

Inspect the supplied parts

Check the model, handing, frame, screen and hardware against the accepted package list. Set damaged or missing components aside for review before installation. A supplier’s standard parts description does not establish the contents or condition of this AHL unit.

Follow the sequence before testing operation

Use the applicable manual for positioning, attachment, handle setup and removal of shipping or squaring pieces. Do not operate the door earlier than the guide allows. Once the sequence is complete, check the latch, multipoint lock and closer together, and verify clearance from the main entry door.

Keep adjustments tied to the manual

The guide includes closer and hold-open adjustments with specific limits. Use those instructions for the actual installed hardware rather than guessing at screw travel or substituting another closer’s procedure. Record the accepted settings and model information so later service can start from the correct product.

Care for the frame and insert

Ask for the exact screen and finish maintenance guidance, including the locking mechanism routine, and keep it with the unit information. Do not infer a cleaning chemical, pressure-washing or corrosion guarantee from stainless-steel and aluminum classifications. Inspect operation and attachment points as directed by the guide.

Is the hinge side the same as the handing name?

The supplier identifies both references for this exact model: Right-hand outswing and left side hinge from the exterior. Use the diagram and written description together; perspective changes can make a photograph confusing.

Is it reversible?

No reversible configuration is asserted for this exact listed unit. Confirm the model and actual hinge arrangement before purchase. Do not plan to change the handing by flipping or modifying the door without explicit product approval.

Does 37.75-inch actual width mean that opening width?

No. Actual unit width and mounting-opening dimensions use different references. The linked guide provides its own opening range for the common 36-by 81 model. Measure using that guide before deciding fit.

Is a glass insert included?

The exact listing identifies a stainless-steel screen and no glass. Do not assume an interchangeable glass insert or another Platinum variant’s accessories are included. Inspect the actual package.

Is a lifetime warranty guaranteed with this purchase?

The linked manufacturer terms contain eligibility, component periods and exclusions. Ask AHL for available purchase and product documents and verify applicability to the actual unit before treating a warranty as included coverage.