Moen Edwyn Brushed Gold Single Handle Deck-mount Pull-down Kitchen Faucet with Sprayer (Includes Deck Plate) (Includes Soap Dispenser)

Choosing this faucet

Use the complete model number 87028BG when comparing this kitchen faucet with other fixtures. The finish suffix and feature suffixes help distinguish similar looking products, so compare the exact model rather than only the collection name. Choose around the tasks performed at this sink: filling containers, rinsing produce or washing dishes. Compare the spout position with the bowl center and consider how the handle will be reached.

For a secondary prep sink, use the actual bowl dimensions rather than assuming a smaller countertop requires a particular faucet size. Use the product details and specifications above to narrow the choice, then compare the manufacturer drawing with the space where the fixture will be installed. Check the actual item photos and current listing information for the unit you are considering.

A model reference image shows the design; it does not establish the condition or contents of an individual item. Think about how the fixture will be used by everyone in the household, and where frequently used containers or dishes will sit during filling or rinsing.

For a replacement project, decide which parts of the existing setup will stay: the sink, countertop, drain, water treatment equipment and supply valves can each affect the final choice. Write down the problem you want the new fixture to solve, such as reaching a different part of the bowl or making the controls easier to reach. Compare that goal with the exact model features above.

Planning the sink layout

Measure the mounting holes, countertop thickness and space between the faucet and backsplash. Check the full handle movement and the clearance under nearby cabinets or shelves. If the model has a moving spray wand, leave a clear path beneath the sink for the hose and its return movement. A useful planning sketch shows the mounting position, bowl outline, nearby fittings and plumbing route.

Measure from the finished surfaces that will remain after the project, including tile, a new backsplash or a replacement countertop. Compare spout reach and overall height as separate dimensions; the height of the outlet is different again. Do not rely on the apparent size in a product photo. If covering unused mounting holes is part of the plan, check the exact accessory and its dimensions before drilling or ordering.

Keep enough space to tighten the mounting hardware and to reach the connections with suitable tools. Resolve fit questions before removing the existing fixture, particularly where the sink or countertop cannot easily be modified.

The Edwyn's pull-down wand needs a clear path below the sink for reliable return to the spout. If the spray head will not remain docked, Moen's troubleshooting guidance identifies an incorrectly positioned hose weight, a damaged docking collar, or a hose that has not yet calibrated as possible causes. The guidance recommends an eight-by-eight-inch clear area for the hose and weight, away from bottles and movable cleaning supplies.

Fixed plumbing may require the weight to be repositioned higher. A damaged collar should be matched to the faucet model before replacement. For a new installation, Moen says hose calibration occurs after the hose has filled with water and been used for twenty-four hours. Check both the space above the sink and the space below it.

A cabinet shelf, garbage disposal or storage organizer may restrict access even when the countertop has room for the faucet. Make a simple cardboard outline from the manufacturer drawing if the position is difficult to visualize, and check the handle movement against the surrounding finished surfaces.

Installation and everyday care

Follow the installation instructions for 87028BG and the instructions for any connected equipment. Have the installer compare the site measurements, water connections and mounting arrangement before work begins. Identify the shutoff valves, protect the finished surfaces and inspect the existing supply connections. Use the specified fittings rather than forcing an adapter or changing a connection based on appearance.

After installation, check all accessible connections while the fixture is operating and again after it has been turned off. For everyday cleaning, start with a soft damp cloth and follow the finish care instructions for the exact model. Check the finish care instructions before using any cleaner or cleaning pad. Keep the outlet and moving controls free of accumulated residue using the approved cleaning method.

Treat installation and care as part of the complete sink or shower setup, including any connected drain, filtration or heating equipment.

Mounting an Edwyn pull-down faucet depends on the sink openings being used. The installation sheet linked by Moen for 87028BG distinguishes a single-hole installation, which seats the faucet on its body gasket, from a three-hole installation using the deck plate and its matching gasket. Under the sink, a bracket and mounting nut secure the faucet shank.

The pull-down hose feeds through the front of the spout and connects to the outlet hose beneath the deck. Moen instructs the installer to push that connection fully into place and test its engagement with a downward tug. The supply lines connect to the shutoff valves, and the installation sequence includes checking those connections for leaks before normal use.

How do I plan access and future maintenance?

Keep the shutoff valves and faucet connections accessible. On a faucet with a pull-down or pull-out wand, avoid storage that catches the hose or interferes with its return. Check the hose path after reorganizing the cabinet, because the available space can change as more items are stored below the sink. Save the exact SKU, finish name and installation paperwork with the project records.

Photographs of accessible connections can help identify the arrangement later without dismantling finished surfaces. When a service part is needed, match the manufacturer part diagram for the exact model rather than choosing a visually similar component. Check for visible moisture after service, and inspect any area where tubing or a hose could rub against another object. If operation changes, consult the troubleshooting steps for this model before replacing unrelated parts.

Keep a record of any separately installed equipment and its model number as well. This makes future filter changes, plumbing service or fixture replacement easier to plan and helps the next person working on the installation understand how the components are connected.

Brushed Gold has its own finish-care entry in Moen's cleaning guidance. To clean the Edwyn's gold surfaces, use a damp cloth with mild liquid dishwashing soap briefly, then rinse thoroughly and dry with a soft cloth. Moen advises against harsh lime-scale removers and pads unsuitable for polished metal; green fibrous scouring pads can contain particles that scratch the surface.

Its guidance also allows periodic application of a quality nonabrasive wax on textured finishes, including Brushed Gold. Because wax can slightly change the appearance of the color, test it on a less visible area first. Rinsing cleaners away promptly helps follow the manufacturer's finish-specific care instructions.

What should I check before ordering?

Before ordering, compare the SKU 87028BG, finish name and configuration with the item you intend to replace. Read the current listing and inspect the available item photos, including close views where supplied. Confirm which parts are present with the actual unit: do not assume that the standard manufacturer package and an individual store listing have identical contents.

If an accessory is needed for your installation, identify its exact part number and check whether it must be purchased separately. Make a short checklist of the mounting fittings, connection fittings and other items your installer requires. Compare that checklist with the listing before arranging the work. Select the correct store view and check the current quantity and fulfillment choices there.

Bring the model number and installation measurements when asking about fit so the advice refers to the specific fixture and location.

For future service, the Edwyn parts diagram identifies the faucet as the 87028 series and lists BG as Brushed Gold. Finish-specific replacement selections therefore require the correct suffix rather than a match based only on shape. The spray-wand assembly is identified by kit 179574, the handle by 183200, and the cartridge-side cap by 160660, with finishes selected using the diagram's suffix table.

The internal cartridge service assembly is listed as 160657, and the hose weight is 125989. One useful distinction is that the gasket kit 158042BL is specified for Brushed Gold as well as Matte Black and Spot Resist Stainless. A black suffix on that particular gasket does not indicate that the faucet itself has a black finish.