HD Christian
Pella 150 Series 71-1/2-in x 59-1/2-in White Exterior White Interior Left-Handed Vinyl Sliding Window Annealed Glass (Half Screen Included)
SKU: 5200157
$299.99per item
Current stock at Marietta
Store pickup
NO STOCK AVAILABLE
Check another store or ask us about availability.
Norcross: 2 units available
Purchase in store, then bring your pickup QR code to the warehouse pickup area. Our staff will scan it, retrieve your order and load your vehicle.
Need transport? Ask us for a referral to an independent local delivery provider. Arrange delivery directly with that provider.
Pickup & transport detailsCheck other stores & update ZIP
- MY STORE
Marietta
NO STOCK AVAILABLE
119 Cobb Parkway North, Suite D, Marietta, Georgia 30062
Norcross
2 units available
6755 Jimmy Carter Blvd, Norcross, Georgia 30071
Checking your Project List…
Adding an item does not reserve stock.
Questions about this item?
Call Marietta · (770) 874-2254Call Norcross · (770) 758-3223Ask about this itemAsk us to confirm this item’s condition and pickup availability. Item reference: 5200157. Purchases are completed in store. In-store pickup only.
Specifications
Verified model details
- Reference manufacturer model
- 1000010968
- Reference frame size
- 71-1/2 x 59-1/2 inches
- Reference rough opening
- 72 x 60 inches
- Reference jamb depth
- 2-11/16 inches
- Reference sash operation
- Left-operable from exterior view
Product details
Pella 150 Series item 5200157 is a white vinyl horizontal sliding window with a wide 71-1/2-by-59-1/2-inch reference frame. The standard configuration has two glazed sections: the left sash operates when viewed from outside and the other section stays fixed. That exterior viewing convention is useful when planning the window's position in a room.
The exact retailer item maps to Pella model 1000010968. Its reference specification lists a 72-by-60-inch rough opening, a 2-11/16-inch jamb depth and a 112-pound weight. It identifies double-pane annealed glass with Low-E argon and an integrated nail fin. The listing calls the screen configuration half screen; confirm the screen and other components with the available unit.
Buying guide
Separate common, frame and opening sizes
The whole-number 72-by-60 format is the opening category, while the reference frame is smaller. Record the site opening, surrounding wall build-up and intended trim arrangement separately. Matching the common size does not establish replacement fit. Have the installer compare the actual unit and the structure that will support it before an old window is removed or a new opening is prepared.
Check left operation from outdoors
Mark the exterior side on your plan and identify the moving sash there. Then consider the interior room arrangement and whether that opening can be reached comfortably. A left-operable slider may be described differently by someone looking from inside, so keep the viewing direction clear when discussing the order or installation.
Review the wide proportions
Compare the window's width and height with neighboring windows, the wall area and the trim planned around it. Its two-part horizontal arrangement has a different appearance from a tall single-hung window. Use a scale sketch to see how the opening sits beside cabinets, furniture or another exterior feature. Check the white finish against actual interior and exterior trim samples.
Plan handling and completeness
The published weight is a useful reference for arranging the handling method and access route. Check the actual unit and its packaging before planning a move through doors or narrow passages. Inspect the frame, nail fin, glass, sash and screen, and confirm all needed components with the available inventory rather than assuming the original retailer configuration guarantees completeness.
Worked frame and opening comparison
For the reference configuration, the seventy-two-inch rough-opening width exceeds the 71.5-inch frame by half an inch. The sixty-inch rough-opening height also exceeds the 59.5-inch frame by half an inch. Those totals compare two rectangles; they do not prescribe individual shim, sealant or sill clearances. Record both dimensions on the site worksheet instead of treating the common 72-by-60 size as the frame measurement. Keep the proposed frame position and wall-depth detail beside that comparison, then have the installer review the supplied unit and applicable instructions. This is especially useful when an existing trim opening looks close to the title size but the underlying structure has not yet been measured.
Installation & care
Keep the correct identity with the order
Use AHL item reference 5200157 and the manufacturer's model information when confirming the window. Other 150 Series units can differ in size, operation or glazing. Do not select instructions for another window solely because its collection name or frame color matches.
Review the complete installation
Have the installer use the instructions applicable to the supplied frame and proposed opening. The fin, jamb dimension and rough opening are selection details; they do not replace requirements for support, fastening, perimeter water management and trim. Resolve any location-specific approval before relying on the catalog type or dimensions.
Choose care for glass and vinyl
Keep the Pella operating and care information with the project. Confirm the cleaning products and methods for the vinyl frame, glass, seals and hardware before use. Check the movement and locking operation on the available unit and address any concern before installation. The vinyl material description does not authorize repainting the frame.
Product FAQs
Which sash opens?
The reference configuration is left-operable from the exterior view. Mark that viewing direction on your plan so the order is clear.
Is 5200157 the Pella model number?
It is the retailer item reference used by this listing. The exact source identifies manufacturer model 1000010968; use both when confirming the unit.
Can I infer a required opening from the common size?
Use the published reference rough opening as a starting point, then have the actual unit and site measurements checked. Common size alone is not a complete fit assessment.
Does the half-screen wording prove the available unit is complete?
No. It describes the reference configuration. Inspect the supplied screen and other components with the AHL inventory before installation.
Product guides
Customer questions & answers
Questions about this product and the selected option. For current stock or pickup arrangements, contact AHL.
0 published questions
No published questions yet. Be the first to ask about this product.