Skip to content
AccessibilityCustomer Service
Need help?

Yosemite Floors

Prairie 5" x RL Handscraped Engineered Hardwood ** Special Order **

Size: 3/8 x 5 inView specifications
$3.29/sqft

$107.94 / unit

32.81 sq ft / unit

SKU: PRIE-STANB

Plan your project

1 unit

$107.94 / unit

1 unit = 32.81 sq. ft.

Your plan needs 1 unit; this store currently shows 0 available. Ask our team to confirm options before visiting. An inquiry does not reserve stock.

Subtotal

$107.94

Current stock at Marietta

Store pickup

NO STOCK AVAILABLE

Check another store or ask us about availability.

Fulfillment
In-store pickup only
Check other stores & update ZIP
  • Marietta

    NO STOCK AVAILABLE

    119 Cobb Parkway North, Suite D, Marietta, Georgia 30062

    MY STORE
  • Norcross

    NO STOCK AVAILABLE

    6755 Jimmy Carter Blvd, Norcross, Georgia 30071

Checking your Project List…

Adding an item does not reserve stock.

Questions about this item?

Call Marietta · (770) 874-2254Call Norcross · (770) 758-3223

Ask us to confirm this item’s condition and pickup availability. Item reference: PRIE-STANB. Purchases are completed in store. In-store pickup only.

Specifications

DIMENSIONS

Product Length (inches)
Random
Product Width (inches)
5
Product Thickness
3/8"
Box Weight
N/A

Details

Product Type
Engineered Hardwood
Material
Hickory
Color
Brown
Shade
Dark
Edge
Micro Bevel
Texture/Surface
Handscraped
Gloss Level
Low
Attached Pad
None
Water Resistance
Not Waterproof
Dent Resistance
Dent Resistance

INSTALLATION & WARRANTY

Placement Location
Indoor
Commercial / Residential Use
Residential

Product details

PRODUCT CATEGORY Engineered Hickory
FINISH Handscraped
EDGE PROFILE Micro Bevel
INSTALLATION METHOD Float, Glue, Staple
SIZE 5” Widths x Random Lengths
OVERALL THICKNESS 3/8”
SQ FT PER CARTON 32.81

Yosemite Floors Prairie–Stanbridge pairs engineered hickory flooring with a handscraped finish. Consider that surface finish alongside your cabinetry, trim and other finishes when coordinating the room’s design.

For layout planning, compare the 5-inch plank width with your room dimensions, and keep in mind that the random-length format does not specify one uniform board length. The stated overall thickness of 3/8 inch also gives you a measurement to use when comparing flooring heights for the project.

The listed coverage of 32.81 square feet per carton provides a starting point for quantity planning: divide your measured floor area by 32.81, then round up to whole cartons. Keep any additional allowance for cuts and your chosen layout separate from that basic coverage calculation.

Buying guide

Choosing this product

Assess Prairie's handscraped hickory character

Prairie in the Stanbridge collection is an engineered hickory floor with a handscraped finish and micro-bevel edges. Judge the surface as part of the room rather than choosing from the color name alone. Place several boards or a representative sample near the furniture, trim and cabinetry that will share the space.

Look along the floor under side lighting as well as straight down at the sample so that texture is part of the decision. Compare the finished surface with any smoother wood elements you plan to keep nearby.

The 5-inch width gives you a clear reference for sketching the rows, while random lengths mean the end joints need a separate layout plan. Mark the room's long walls, doors and any hearth or fixed feature that will draw the eye. Discuss the intended plank direction and border rows before installation starts.

If you are comparing Prairie with a wider floor, compare samples at room scale and consider the row spacing you prefer; a close-up photograph does not show how the different widths will read across your entire space.

For a fair showroom comparison, give each shortlisted floor a simple three-part note: the wood species, the surface treatment and the edge detail. For Prairie those entries are engineered hickory, handscraped and micro bevel. Then record what you liked or disliked about each physical sample under those headings.

This keeps a preference for Prairie's texture separate from a preference for its color, or for the way its board edges appear together. If two people are choosing the floor, compare those notes before selecting other finishes. You can then explain the qualities you want to preserve if you later review a different color or collection.

Planning the project

Turn room measurements into a Prairie carton plan

Prairie is listed at 32.81 square feet per carton and 3/8-inch overall thickness. Calculate the total area to receive this floor, then add the cutting allowance agreed for your layout before dividing by 32.81. Round up to whole cartons. For an illustrative 180-square-foot room with a 10% allowance, the adjusted area is 198 square feet.

Six cartons provide 196.86 square feet, so that example rounds to seven cartons, or 229.67 square feet. Keeping the arithmetic visible prevents a nearly sufficient carton count from being mistaken for enough material.

Review the 3/8-inch board thickness alongside the installation system when checking the finished height. The board measurement does not include every possible supporting layer or subfloor correction. Note adjoining tile, carpet and doorway clearances on the room plan, then have the installer choose suitable transition details. For an extension to an older floor, bring an offcut and any old label into the comparison.

Similar color names or the word hickory do not establish an identical board profile, texture or finished height.

If your shortlist includes a 9/16-inch engineered board, Prairie's listed 3/8-inch board is nominally 3/16 inch thinner. That comparison can help you identify a question for an installer when the existing doorway or neighboring floor leaves little room for a height change. It does not establish the difference between two finished installations, because the selected installation systems and supporting layers may differ.

Ask for a small section drawing showing the existing subfloor, proposed layers and top of each finished floor. Keep that drawing with the quotation so a seemingly convenient board thickness is evaluated against the complete work required.

Installation & care

Installation Options
Floor Only
Minimum Acclimation Time
Some Acclimation Required
Subfloor
Concrete, Vinyl, Plywood, Tile
Installation Type
Nails / Glue / Float
Underlayment
Required
Transitions Moldings Required in Doorway
Yes
Vapor Barrier
Always over Concrete Subfloor
Cleaning Method
Vacuum, Wet Mop, Steam Mop, Jet Mop

Installation and everyday care

Confirm the method before assembling installation supplies

The Prairie product page lists float, glue and staple installation methods. Choose among them using the actual flooring profile, the room and the subfloor requirements, with the installer reviewing the applicable instructions. Do that before ordering underlayment, adhesive or fasteners. The Zain engineered-wood brochure calls for a flat, dry and structurally sound substrate, correction of moisture sources, and inspection of boards before installation.

Review the supplied material while you can still raise a visible finish or appearance concern.

Treat the handscraped surface as a finish to maintain, not as permission to use an aggressive cleaning process. Obtain care instructions for the actual floor and confirm the proposed cleaner with them. Keep spills from lingering, and discuss furniture movement and protection before the room is furnished.

Save a carton label and an offcut with your project records so that future maintenance questions can be tied to Prairie Stanbridge rather than to a generic hardwood description.

Product FAQs

Product and compatibility questions

Is handscraped the same thing as a thicker wood wear layer?

No. Handscraped describes the listed finish, while 3/8 inch is Prairie's listed overall thickness. The accessed product information does not state a veneer thickness or a permitted sanding schedule. Keep those questions separate when comparing engineered floors. If future resurfacing is important to your plan, request guidance for this exact construction and finish before buying.

Neither the handscraped description nor the total board thickness establishes how much material could be removed or whether a proposed refinishing process is appropriate.

Ordering and maintenance questions

How should I plan a random-length Prairie layout?

Estimate by square-foot coverage and plan the visual arrangement using the boards actually supplied. Random length does not provide a guaranteed count of long or short boards in the information reviewed here. The manufacturer's general hardwood brochure recommends opening a few cartons and mixing boards during installation. Discuss how the joints will be distributed through the room before work starts, especially near a prominent doorway or feature.

Keep any preferred arrangement within the applicable installation requirements and avoid assuming that one photographed room defines the contents of your cartons.

Product guides

Customer questions & answers

Questions about this product and the selected option. For current stock or pickup arrangements, contact AHL.

0 published questions

No published questions yet. Be the first to ask about this product.

    You may also like

    Available alternatives at your store