Skip to content
AccessibilityCustomer Service
Need help?

Dewalt

DEWALT 3.25-in W 5.5 -Amp Handheld Planer

$129.99/ unit$184.00

SKU: D26676

$129.99per item

Subtotal$129.99

Current stock at Marietta

Store pickup

NO STOCK AVAILABLE

Check another store or ask us about availability.

Norcross: 2 units available

Fulfillment
In-store pickup only
Check other stores & update ZIP
  • Marietta

    NO STOCK AVAILABLE

    119 Cobb Parkway North, Suite D, Marietta, Georgia 30062

    MY STORE
  • Norcross

    2 units available

    6755 Jimmy Carter Blvd, Norcross, Georgia 30071

Checking your Project List…

Adding an item does not reserve stock.

Questions about this item?

Call Marietta · (770) 874-2254Call Norcross · (770) 758-3223

Ask us to confirm this item’s condition and pickup availability. Item reference: D26676. Purchases are completed in store. In-store pickup only.

Specifications

Verified model details

Model number
D26676
Power source
Corded electric
Motor amperage
5.5 A
Cutting width
3-1/4 in. (82 mm)
Planing depth adjustment
0.1 mm per click
Maximum depth of cut
Approximately 1/16 in. (1.6 mm)
Intended work material
Wood and wood products

Product details

The DEWALT D26676 is a corded portable hand planer with a 5.5-amp motor and a 3-1/4-inch cutting width. It is designed for work on wood and wood products, giving you a handheld way to remove material from an edge or surface. Its front adjustment knob and rear handle provide the two holding points used while guiding the tool along the workpiece.

The front knob sets the planing depth. The D26676 instruction manual describes 0.1-millimeter adjustment steps and recommends checking a new setting on scrap wood. Several shallow passes help you approach a marked line gradually while checking the result between cuts. For a fitting job, establish how much material needs to come off before starting; removing a little at a time gives you opportunities to check the fit again.

Keeping the shoe flat is central to using this type of planer. The manual describes starting with the front shoe supported on the wood, bringing the motor up to speed and guiding the tool steadily across the surface. Pay particular attention to support at the beginning and end of a pass.

Clamp the work securely and read the complete model instructions before setting up the cut, dust handling and protective equipment.

DEWALT identifies high-speed steel blades for the D26676 in its blade-support documentation. Use that model number when checking replacement blades, the carrier arrangement and the blade-setting procedure. The shared D26676/D26677 manual contains different blade instructions, so follow the section matching the actual blade assembly. Confirm the installed blades and any fence, gauge or wrench supplied with the AHL item before planning a job around those accessories.

The manual also documents a rabbet fence for controlling the tool on narrow workpieces and making stepped edge cuts through repeated passes. If your project needs that function, check the fence and adjustment hardware against the model diagram. Disconnect the planer before adjustments or maintenance, keep the chip discharge clear as directed, and use the manual's cleaning and blade-setting instructions when preparing it for the next job.

Product guides

Customer questions & answers

Questions about this product and the selected option. For current stock or pickup arrangements, contact AHL.

0 published questions

No published questions yet. Be the first to ask about this product.