ELLAI White Elongated Chair height 12-in Rough-In 1.6 GPF Dual Flush 2-piece Toilet

Check rough-in separately from room fit

Record the bathroom's rough-in measurement and compare it with the specified 12-inch model requirement. Then assess the overall footprint against the door swing, adjacent fixtures and the space in front of the toilet. These checks are related but cannot replace each other. A toilet can look compact in a photograph while still needing a different plumbing position, and a matching rough-in does not by itself establish comfortable room clearance.

Compare elongated seating and height

The elongated bowl affects the front-to-back format, so compare it with the room and with your preferred seating shape. The exact listing gives 17-3/4 inches to the seat and 16-3/4 inches to the bowl without the seat. Use seating measurements when evaluating sitting and standing comfort. The 31.6-inch overall height includes the tank and should not be mistaken for the sitting height.

Plan around the top controls

Think about how the flush buttons will be reached and what sits above the tank. A shelf, cabinet or decorative item should be considered with access to the controls and future tank servicing in mind. The documented maximum is 1.6 gallons per flush; the lower flush figure differs between matching sources, so it is not used here as a buying claim.

Check the unit's current operating information for its exact flush settings.

Keep future replacement questions simple

Retain the MT-807A model reference and any seat or internal component identification with the installation paperwork. A concealed exterior and elongated bowl describe the toilet's format, but they do not establish that every replacement seat or flush part will fit. If you already have accessories you hope to reuse, have their dimensions and attachment requirements checked against this exact toilet.

Planning those details before purchase is more reliable than finding a visually similar part later.

Compare the assembled outline with nearby fittings

Use the listed 27.6-inch depth and 14.4-inch width to draw a reference rectangle on the bathroom plan, then check the actual toilet before relying on that outline. Show the vanity doors and the bathroom door in their open positions. A fixture can match the plumbing position yet still conflict with a moving door or make the side of the bowl difficult to reach.

Also mark the top of the tank, using the listed 31.6-inch overall height only as a reference for shelves and other items above it. Do not confuse this overall height with the chair-height seating description. The concealed trapway's exterior shape deserves its own access check along the floor and beside the bowl.

Review the installation components

A two-piece replacement should be reviewed as a tank-and-bowl system with the seat and mounting parts. Obtain the matching MT-807A installation instructions and have the actual contents checked against the planned installation. Standard new-product package descriptions are not a substitute for reviewing this unit. Confirm the water-supply connection and any parts that the installer will need before scheduling the work.

Keep cleaning access in the layout

The concealed trapway gives the exterior a more continuous profile than an exposed trapway design. When placing the toilet, consider access around the sides and at the base for routine cleaning. Use the toilet and seat manufacturer's care directions for cleaners and methods. Retain the model identification for future seat or flush-component questions instead of choosing replacement parts from appearance alone.

What is the rough-in size?

The matching model listings specify 12 inches. Compare this with the bathroom's rough-in measurement separately from the toilet's overall dimensions.

What are the assembled dimensions?

The exact retailer lists 27.6 inches deep, 14.4 inches wide and 31.6 inches high. Confirm the actual unit and installation drawing before finalizing the room.

Does chair height mean the tank height?

No. Seating height is measured at the bowl or seat. The exact listing gives 17-3/4 inches with the seat, while overall height includes the tank.

Is the seat slow-closing?

Matching sources disagree on this feature. Inspect the actual seat and its information before treating slow-close operation as part of the purchase.

Can an existing replacement seat be reused?

Check the actual seat's attachment and dimensions against MT-807A before planning to reuse it. Elongated describes the bowl format, but it does not establish that every elongated replacement seat fits the mounting arrangement. Keep the exact toilet and seat references together when compatibility is important.

What should I compare when replacing another elongated toilet?

Keep a record of the existing rough-in, complete installed footprint, seat position and the space around the tank. Elongated describes a bowl format; it does not establish identical dimensions or mounting arrangements across brands. Compare those site measurements with the MT-807A unit and its installation information. If the existing seat is a favorite feature, measure and identify it separately before asking about reuse.

The new toilet's elongated designation alone does not confirm that the old seat or its fastening arrangement will match.