Nantucket Island Atlantic Collection Hickory Engineered Hardwood Flooring

Choosing this product

Compare Nantucket Island's wide hickory format

Nantucket Island in the Atlantic Collection pairs engineered hickory with a wire-brushed appearance and a 7.5-inch plank width. Start a design comparison with several boards or a representative sample rather than using the island name as a color description. Look at the grain and texture beside the cabinetry and trim that will remain in the room.

View the sample from the doorway as well as close up, since that is how you will see the floor in daily use.

Map the main sight lines before settling on a plank direction. In an open room, note where the floor meets hallways, kitchen cabinets or an existing floor; in a smaller room, check the first and last row widths on the sketch. These choices can be discussed with the installer while they are easy to change.

The stated width is a useful layout reference, but a sample board and actual room measurements should guide the final setting-out plan.

For a direct comparison with narrower flooring, mark a 60-inch-wide reference area using removable paper strips away from the installed floor. Eight advertised 7.5-inch plank widths span that distance, compared with twelve 5-inch widths. This is a visual comparison of row spacing, not an installation measurement: actual boards, joints and the room perimeter still govern the finished layout.

Put a chair or table beside the mock-up and view it from your usual seating position. That exercise helps you decide whether you prefer Nantucket Island's wider rhythm before you commit to a full-room purchase, especially when photographs of competing floors show rooms of very different sizes.

Planning the project

Plan coverage and the transition to adjoining floors

The listed carton coverage is 38.9 square feet. Measure the spaces that will receive Nantucket Island, including any connected closets, and agree on a cutting allowance before converting the area to cartons. Divide the adjusted area by 38.9 and round up. As an example, a 250-square-foot area with an illustrative 10% allowance becomes 275 square feet; eight cartons provide 311.2 square feet, while seven provide 272.3.

That rounding difference is useful to see before choosing the final quantity. It does not mean the same allowance suits every room.

The manufacturer describes the thickness as nominal 9/16 inch; the merchant description also lists 14.29mm. Use that as a product comparison point, then have the installer measure the complete proposed assembly against neighboring surfaces. Adhesive, underlayment or subfloor work can affect the finished height. Mark doors, thresholds and appliance clearances on the plan before selecting transition pieces.

Keep those measurements with the carton calculation so the ordering conversation includes the practical details at the edges of the room.

When comparing project quotations, ask each installer to identify the same Atlantic Nantucket Island product and separate the flooring material from the work needed in your room. Useful lines to compare include removal of the old floor, subfloor preparation, the selected installation system, doorway finishing and moving furniture. Mark which of those tasks you will handle yourself so they are counted consistently.

Give each bidder the same room sketch and identify any stairs, floor vents or unusual edges that need separate discussion. This makes the estimates easier to compare without assuming that two quotations for 38.9-square-foot cartons describe the same completed project.

Installation and everyday care

Review the installation method and protect the surface

Have the installer confirm the approved method for the actual cartons and subfloor before installation. The manufacturer's resources include engineered-hardwood installation instructions covering preparation, moisture evaluation and different installation systems. A list of possible methods is not a substitute for choosing the correct system for your room.

Resolve subfloor condition and document the product identity before work starts, and inspect the boards while visible concerns can still be raised before they are fixed in place.

For maintenance planning, use the care guidance for this floor's finish. The manufacturer's engineered-wood warranty document specifically identifies damage from steam mops and wet mopping among its exclusions; that supports keeping those methods out of the care plan. Use furniture protection and an appropriate cleaner, and ask the installer to leave the applicable instructions with you.

Keep the product label and a spare board as references for future cleaning-product or repair discussions.

Product and compatibility questions

Is Nantucket Island engineered hardwood the same as a wood-look vinyl?

No. This item is identified as engineered hickory hardwood. Compare construction and species first when evaluating another product with a similar photograph, then compare finish and dimensions. A visual resemblance does not establish equivalent installation requirements or maintenance. If your decision involves an adjoining wet area, describe that use to the installer and check suitability explicitly.

The hardwood description does not establish a waterproof floor assembly or permission to use a vinyl-floor cleaning routine.

Ordering and maintenance questions

What should I check before matching an existing Atlantic floor?

Compare the complete collection and color name, the carton label, plank profile, width and thickness with the existing material. Bring an actual offcut if possible and review the samples together under the same lighting. The manufacturer cautions that website images cannot reproduce every screen's color and texture accurately. Record the existing floor's label information before requesting additional material; the name Nantucket Island by itself cannot establish an exact match.

Discuss any visible difference before an extension or patch is installed.