Skip to content
AccessibilityCustomer Service
Need help?

North American Adhesives

North American Adhesives Magna Flex SG White Tile Mortar – 44 lb

$14.99/ unit

SKU: NA3770-WHITE

$14.99per item

Subtotal$14.99

Current stock at Marietta

Store pickup

83 units available

Ask our team to confirm your quantity and arrange pickup before visiting.

Fulfillment
In-store pickup only
Check other stores & update ZIP
  • Marietta

    83 units available

    119 Cobb Parkway North, Suite D, Marietta, Georgia 30062

    MY STORE
  • Norcross

    51 units available

    6755 Jimmy Carter Blvd, Norcross, Georgia 30071

Checking your Project List…

Adding an item does not reserve stock.

Questions about this item?

Call Marietta · (770) 874-2254Call Norcross · (770) 758-3223

Ask us to confirm this item’s condition and pickup availability. Item reference: NA3770-WHITE. Purchases are completed in store. In-store pickup only.

Specifications

Verified model details

Manufacturer model
NA 3770 Magna Flex SG White
Manufacturer bag format
44 lb (20 kg)
Mortar formulation
Polymer-modified large-and-heavy-tile and thin-set mortar
Maximum embedded bond coat
1/2 in. (manufacturer also states 12 mm)
Application temperature
40–95°F (4–35°C)
Published standards
ANSI A118.4HET and A118.11; ISO 13007 C2TE

Product details

North American Adhesives NA 3770 Magna Flex SG White is a polymer-modified mortar for large and heavy tile, with nonsag behavior on walls and nonslump support on floors. AHL lists the white 44-pound bag; the exact manufacturer datasheet identifies that package format and also permits thin-set use.

The mortar supports an embedded bond coat up to 1/2 inch, stated by the manufacturer as 12 mm. It exceeds ANSI A118.4HET and A118.11 requirements and carries an ISO 13007 C2TE classification. Select it by the tile, substrate and exposure conditions as well as the bag color: the formulation has specific exclusions for some stone, glass and immersed installations.

Buying guide

Match the installation to the published scope

The datasheet covers most interior and exterior residential floors, walls and countertops in dry or wet locations, including tub surrounds and showers. Its commercial scope includes most interior and exterior floors and countertops, and most interior walls. Named tile categories include ceramic, porcelain, manufactured stone, quarry tile, pavers, Saltillo and many marble, granite and other natural stones. That list is subject to the exclusions below.

Check the tile backing and exposure description before deciding that a large-format tile automatically belongs within this mortar’s scope.

Confirm the supporting surface

Suitable references include concrete cured at least 28 days, masonry, cement mortar beds, render coats and leveling coats. Cement backer units require their manufacturer’s installation instructions. Gypsum wallboard and plaster are limited to interior dry walls, with priming potentially required. Direct-bond plywood must be Group 1 exterior-grade CC-plugged or better under APA/U.S. PS 1-95, or the specified CANPLY SELECT/SEL-TF exterior Douglas-fir classification under CSA-0121.

That use is limited to interior residential or light-commercial dry floors and countertops. The datasheet excludes dimensionally unstable hardwood, OSB and metal substrates. Gypsum-based patching or leveling material needs a suitable primer or sealer before this mortar is applied.

Read coverage by trowel geometry

Approximate yield from a 44-pound bag is 70–86 square feet with a 1/4-by-1/4-by-1/4-inch trowel; 53–62 with 1/4-by-3/8-by-1/4; 35–43 with 1/2-by-1/2-by-1/2; and 24–28 with 3/4-by-9/16-by-3/8. The three dimensions are width, depth and spacing. Actual yield varies with the substrate profile and tile. These ranges help budget material after the installer selects a trowel that achieves the required contact; they are not four interchangeable ways to reduce the purchase quantity.

Conditional bag estimate for 120 square feet

For an example using the lower end of each published yield range, a 120-square-foot requirement rounds to two bags at 70 square feet per bag, three at 53, four at 35, or five at 24. Those counts supply approximate low-end totals of 140, 159, 140 and 120 square feet respectively. The final case has no calculated surplus.

Review the chosen tile and trowel in a trial area, then account for the actual profile, back-buttering, waste and desired reserve. A higher-yield trowel is suitable only if it also delivers the required mortar contact.

Allow for the complete tile assembly

The stated embedded bond-coat limit describes the mortar after the tile is set, rather than the height of uncompressed trowel ridges. Show the tile, mortar, approved membrane and any separate preparation layer on the height drawing at doors and neighboring finishes. Large-and-heavy-tile mortar is not designed to correct an uneven floor; the supporting surface must already meet the applicable flatness requirements.

Use separate approved preparation material where needed instead of budgeting a thicker NA 3770 bed to fill low spots.

Installation & care

Measure water for the intended application

For one 44-pound bag in nonslump floor or nonsag wall use, the manufacturer specifies 5.3–5.9 U.S. quarts of clean potable water. For use with membranes, it specifies 5.9–6.4 U.S. quarts. Put the water in a clean container and gradually add the powder while mixing at about 300 rpm. Mix to a uniform paste without lumps, avoid prolonged mixing, let it stand for five minutes, then remix.

If it becomes heavy or stiff, remix without adding liquid. Choose the applicable range from the assembly instructions rather than using extra water to extend working time.

Verify contact while placing the tile

Select a trowel deep enough to produce more than 80% mortar contact to tile and substrate for interior work, and more than 95% for exterior work, commercial floors and wet applications. Back-buttering may be necessary. Key mortar into the support with the flat trowel side, then comb additional mortar in one direction parallel to the tile’s shortest dimension. Press the tile into wet mortar and move it across the ridges.

Periodically lift tiles to inspect contact. Clear excess from joints so at least two-thirds of the tile depth remains available for grout.

Distinguish bucket life from exposed working time

The product table reports pot life greater than two hours and open time up to thirty minutes at 73°F and 50% relative humidity. These are different clocks: mortar in the container and mortar spread on the supporting surface do not behave identically. Spread only the area that can receive tile before the mortar forms a skin. The permitted application temperature is 40–95°F.

Cold conditions and high humidity can change the published properties, so the table does not promise a thirty-minute placement window on every site.

Keep movement joints clear and clean promptly

Follow the specified expansion and control joint design; the datasheet references TCNA EJ171 and the corresponding TTMAC detail. Do not bridge those joints with mortar or tile. Joint components belong to the designed assembly and are separate from the tile-setting mortar. Clean tools and tile with water while the mortar is still fresh.

Planning the spread area and cleanup access together helps avoid leaving hardened mortar in joints that must receive grout or movement-joint material.

Protect the installation through the cure period

The protection instructions call for at least 24–48 hours without disturbance, light traffic or grouting. Keep general traffic off for at least 72 hours and heavy traffic off for at least seven days. Protect exterior work from rain for 72 hours and freezing for 21 days. Nonporous supports such as waterproofing membranes or existing tile can require longer setting and curing.

Plan access, weather protection and the next trade’s work around the applicable conditions, rather than treating the product table’s 24-hour grout entry as permission to resume all traffic.

Product FAQs

Does white mortar make every glass or stone tile suitable?

No. White mortar is recommended for light-colored and translucent natural stone, but NA 3770 is not for transparent or translucent glass tile. It also excludes moisture-sensitive stone such as green marble and some limestone or granite, agglomerate tile and resin-backed tile. The manufacturer directs those cases toward suitable epoxy or urethane adhesives. Dimensionally weak limestone and travertine are limited to thin-set use.

Identify the tile material and backing before selecting the adhesive.

Can it be used for a pool or exterior commercial facade?

The datasheet excludes submerged installations such as pools and spas, and exterior commercial building facades. A listed shower application does not extend the mortar’s scope to continual immersion. For severe freeze/thaw exposure, the manufacturer recommends a liquid latex additive such as NA 3000 for best performance; obtain the applicable full assembly and mixing instructions for that exposure.

How should the bag’s usable age be checked?

The published shelf life is one year in original unopened packaging. Check the actual production information, storage history and package condition before use; the product name and stock count do not establish how much usable shelf life remains. Keep the bag identification with the job record and use the current applicable datasheet and safety sheet for handling and installation.

Product guides

Customer questions & answers

Questions about this product and the selected option. For current stock or pickup arrangements, contact AHL.

0 published questions

No published questions yet. Be the first to ask about this product.

    Product specifications

    Browse Flooring, Tile & Mosaic Adhesives archive

    More Flooring, Tile & Mosaic Adhesives specifications