Sandstone 12 x 24 Stone Core Luxury Vinyl Tile Flooring

Allocate the final short pieces explicitly

Draw the starting line and visible perimeter of the intended field. Record the exact lengths needed at the final edge, then assign them to stock pieces. Separate a reusable offcut from a piece that merely has the right nominal area: the remaining length, cut edge and required joint detail all affect where it can be used.

Conditional 24-inch cutting comparison

A nominal 24-inch piece contains exactly two 12-inch lengths by arithmetic, leaving no allowance for a saw cut. A cutting method with positive kerf cannot produce two exact 12-inch pieces from an exact 24-inch usable length. This is a cut-allocation check: measure the required sections and cutting loss before reducing the number of full pieces.

Worked carton threshold

Suppose the reviewed requirement for area, selected cuts and desired spares is 340 square feet. At the listing’s 20.03 square feet per carton, 16 cartons provide 320.48 square feet and would be short; 17 cartons provide 340.51 square feet. Round to whole cartons after reviewing the actual cut and spare requirements.

Reconcile carton weight for pickup handling

AHL lists 35 pounds per carton, while the named manufacturer collection lists 34.5 pounds. For the seventeen-carton order above, those references produce 595 and 586.5 pounds respectively, a difference of 8.5 pounds. Use the actual shipment weight when arranging handling; neither calculation includes a pallet or wrapping. Keeping both references beside the Sandstone order prevents the rounded merchant label from appearing to be a measured shipping total.

Compare the wear-layer unit with the full assembly

The published 22 mil wear layer is 0.5588 mm after conversion, while 5 mm is the separate overall assembly measurement. Keeping those figures in the same unit makes the scale clear when comparing rectangular vinyl options. Do not read the number 22 as millimeters or subtract it from 5 mm. The conversion describes a dimension; it does not establish a service life or a refinishing allowance.

Match the wear-layer and thickness references to the supplied carton when comparing a different version.

Check the height budget at a fixed opening

In a hypothetical doorway with 11 mm of measured space above the prepared supporting surface, adding the listed 5 mm assembly leaves 6 mm geometrically. Any separately approved preparation or other layers change that result. Record the lowest point across the door swing or appliance-removal route, rather than checking one spot at the center.

Use the complete drawing to review the fit; the arithmetic gives no minimum clearance or door-trimming instruction.

Confirm the collection and locking-system guide

Create Flooring provides an SPC/WPC installation PDF, but it does not name SC1224SS or Sandstone and its illustrated steps refer to a seven-inch plank. Confirm the supplied Stonecore version and locking system before applying its numerical acclimation, moisture, stagger or clearance requirements. Those values are not prescribed here.

The following care topics summarize the manufacturer’s published SPC care document for a carton confirmed to match its SPC family; the geometry examples give no joint or installation-pattern permission.

Published SPC surface-cleaning routine

The manufacturer’s SPC care document specifies removal of grit before periodic cleaning, a hard-floor vacuum attachment without a rotary brush, and a microfiber mop pad with a pH-neutral cleaner. It excludes vinegar, soap-based detergents, oil soaps, wax, combined cleaner/polish products and harsh scouring pads. It also warns against steam cleaning and soaking the floor.

Plan furniture and sunlight protection

Create Flooring’s SPC publication identifies furniture movement and sustained direct sunlight as causes of surface damage. It calls for protective pads or coasters at furniture, lifting rather than dragging heavy objects, entrance mats to collect debris, and blinds or curtains during peak sunlight. Inspect protective pads as they wear or collect grit.

Place the furniture and traffic routes on the room sketch so protection can be arranged with the floor, rather than after marks appear in the exposed field.

Is the Sandstone finish natural stone?

AHL classifies this SKU as luxury vinyl tile. The manufacturer’s named Stonecore collection describes a travertine appearance, which is a surface-design reference rather than proof of a natural-stone tile. Compare the actual construction and carton identity when choosing a ceramic or stone alternative.