Whirlpool 22.07-cu ft Standard-Depth 33.0-in Wide Bottom-Freezer Refrigerator with Ice Maker ( Stainless Steel ) ENERGY STAR Certified

Choosing this appliance

WRB322DMBM puts fresh foods above a lower freezer drawer.

Compare the compartment layout with the groceries and containers you normally store. Consider fresh-food access, frozen-food organization and the way the doors open in your kitchen. Check dispenser and ice features in the exact model specifications. Capacity alone does not show whether a particular shelf arrangement works well for wide trays or frequently used items.

Compare the appliance with the tasks you perform most often, rather than choosing by exterior size alone. List the features you will use regularly and separate them from features you may rarely need. Consider who will operate the controls, how easily they can read the settings, and where frequently used items will be placed. Use the exact model specifications to compare alternatives.

Check the finish alongside the surrounding cabinets, work surfaces and other appliances in the same lighting. Similar finish names can have different tones or textures. A manufacturer reference photograph helps identify the design, while the photographs and listing for the individual item establish what is offered. Keep the complete model number available when discussing an appliance with your installer.

Think through a typical busy day in the space. Allow room for another person to pass while the appliance is in use, and consider whether nearby drawers or doors would compete for that room. Operating convenience depends on the layout as well as the appliance features. Resolve the features that matter most before choosing between closely related model numbers.

Planning the fit and layout

This standard-depth refrigerator belongs to the 33-inch width category.

Measure the delivery path and final opening, then check door swing and drawer extension separately from cabinet depth. Allow the operating clearances specified by the manufacturer. Plan access to the electrical supply and any water connection required by the model. Consider nearby walls and handles when deciding whether each door can open sufficiently for routine use.

Measure from the finished surfaces that will remain after installation. A cabinet opening may change when flooring, a countertop or trim is replaced, so record the final usable width, height and depth. Compare the installation drawing with the opening, not just the advertised appliance size. Record nearby doors, drawers, outlets and utility connections on the same sketch.

Plan the delivery route from the building entrance to the installation area. Measure narrow doorways and turns, and consider steps, floor protection and access around fixed furniture. Discuss any removal or lifting requirements before arranging delivery. An appliance fitting its final opening does not by itself establish that it can pass through every part of the route.

Keep the dimensions and model number together in the project notes so the installer can check them against the exact instructions. Distinguish the overall product dimensions from required cutout dimensions and operating clearances. Where cabinetry must be modified, check the finished drawing before cutting. Leave access to the utilities and any service area required by the manufacturer.

Installation and everyday care

SpillGuard glass shelves help contain spills before they reach lower shelves.

Follow the installation instructions for leveling, door adjustment and any required water connection. Check that the appliance stands securely and doors close as intended. Use the documented initial temperature settings and allow the setup process described by the manufacturer before regular loading. Arrange food so it does not block the interior airflow points identified in the instructions.

Have the installer read the instructions for the complete model number before work begins. Electrical, plumbing and ventilation arrangements can vary between appliances with similar appearances. Compare the site connections with the documented requirements, and use the specified fittings and protection. Keep the installation paperwork with the product records for later maintenance.

After installation, test the basic functions described in the instructions and check accessible connections before the appliance is placed into regular use. Confirm that controls can be reached and doors or panels move freely. Follow the model instructions for initial setup and cleaning. If a setting behaves unexpectedly, consult the troubleshooting steps before changing unrelated connections.

Clean exterior surfaces using the method recommended for the exact finish. Start with a soft cloth and remove spills promptly where permitted by the instructions. Check whether a cleaner is suitable before applying it to a visible panel, control or trim piece. Keep moisture away from electrical controls and avoid using abrasive pads on finished surfaces unless expressly permitted.

How do I plan access and future maintenance?

Humidity-controlled crispers and a deli drawer provide separate fresh-food storage areas.

Keep the door seals and accessible shelves clean using the methods stated in the owner instructions. Follow the model requirements for any water filter or ice system. Leave ventilation and service access clear around the appliance. When temperature performance changes, check the documented settings, door closure and loading recommendations before diagnosing a component.

Record the complete model number and the serial number from the actual appliance after it is available. Retain the operating and installation instructions with the project records. When a replacement part is needed, match the exact manufacturer parts diagram and model revision rather than selecting a visually similar component. Photograph accessible connections if that will help future servicing.

Keep the area needed for routine cleaning and service reachable. Check that stored items cannot obstruct vents, connections or moving components. If performance changes, note the setting and symptoms before consulting the model’s troubleshooting instructions. Follow the documented process for disconnecting utilities before service work that opens panels or connections.

Make a short maintenance record for tasks described in the owner instructions. Include any separately installed equipment and its model number, such as a filtration component or ventilation accessory. The next person servicing the appliance will then have the relevant identification and layout information available without needing to dismantle finished surfaces just to understand the arrangement.

What should I check before ordering?

DMBM identifies the stainless bottom-freezer configuration of this refrigerator.

Distinguish cabinet depth, depth with doors and overall depth with handles when comparing fit. Verify any water-supply fitting, filter or installation component needed for the exact model. Check which items are actually present with the individual appliance. Confirm the delivery route and door-opening space before arranging collection or installation.

Compare the complete model number, finish and configuration with the appliance in your project plan. Closely related models may have different controls, utility connections or installation dimensions. Bring the model number and measurements when asking about compatibility so the answer refers to the specific appliance and the space where it will be installed.

Read the current listing and inspect the available photographs for the individual item. Confirm its condition and the parts actually present before ordering; a manufacturer reference image describes the model design. Ask about any accessory, fitting, bracket or trim needed for your installation, and identify the exact part number if it must be obtained separately.

Select the intended store view and check the current quantity and fulfillment options there. Arrange installation after confirming the appliance, the delivery route and any required site preparation. If replacing an existing item, record its model and connections before removal. Compare the installer’s parts checklist with the listing so necessary components can be planned in advance.

Keep a copy of the selected model information with the project measurements. Before arranging collection, discuss the appliance dimensions, handling needs and destination access with the people responsible for moving it. Coordinate any cabinet, electrical or plumbing work that must be completed first. These preparations help avoid having a delivered appliance waiting in an unfinished installation area.